FixVault
Home › Chevrolet › 2005 › SSR Automatic › Repair and Diagnosis › External Pages › Different car › Section 161 (Stationary Window System) › Repair Instructions › Windshield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing/Installing Windshield
    GM880612Courtesy of GENERAL MOTORS CORP.
  1. Install a stationary window into the opening. Refer to Urethane Adhesive Installation of Stationary Windows (Windshield)  or Urethane Adhesive Installation of Stationary Windows (Back Window) .
  2. Install the rearview mirror. Refer to Rearview Mirror Replacement .
  3. Install the interior windshield pillar garnish molding. Refer to Windshield Garnish Molding Replacement in Interior Trim.
  4. Install the air inlet grille. Refer to Air Inlet Grille Panel Replacement in Body Front End.
  5. Install the windshield wipers arms and blades. Refer to Wiper Arm Replacement in Wipers/Washer Systems.
  6. Remove the double layer of masking tape around the perimeter of the painted surfaces and the interior trim.
  7. Close the hood.
About FixVault