Installation Procedure
WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
- Position the antenna assembly to the windshield and connect the coaxial leads to the antenna.
- Route the antenna coaxial cable to the windshield header.
- Align the antenna assembly to the windshield bracket retaining clips. Push the assembly to the driver side of the vehicle to engage the retainers.
- Install the windshield upper garnish molding. Refer to WINDSHIELD UPPER GARNISH MOLDING REPLACEMENT in Interior Trim.