FixVault
Home › Chevrolet › 2005 › SSR Automatic › Repair and Diagnosis › External Pages › Different car › Section 249 (Automatic Transmission - Introduction & Repair Instructions) › Repair Instructions › Automatic Transmission Range Selector Cable Adjustment

Automatic Transmission Range Selector Cable Adjustment

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Releasing The Shift Control Cable Adjuster Lock
    GM73240Courtesy of GENERAL MOTORS CORP.
  1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Shift the transmission into NEUTRAL.
  3. Using a flat bladed screwdriver, carefully pry to release the transmission shift control cable adjustment lock.
  4. Check to be sure that the transmission floor shift control is in the NEUTRAL detent position.
  5. Check to be sure that the transmission is in the NEUTRAL detent position.
    6. Fig 2: Depressing The Shift Control Cable Adjuster Lock
    GM73238Courtesy of GENERAL MOTORS CORP.
  6. Press to secure the transmission shift control cable adjustment lock.
  7. Lower the vehicle.
About FixVault