FixVault
Home › Chevrolet › 2005 › SSR Standard › Repair and Diagnosis › Engine Performance › System › Engine Control System - 6.0L - Introduction › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Fuel Level Sensor
    GM1474427Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel sender assembly. Refer to Fuel Sender Assembly Replacement .
  2. Disconnect the electrical connector from under the fuel sender cover.
  3. Remove the fuel level sensor (1) from the fuel sender assembly.
About FixVault