FixVault
Home › Chevrolet › 2005 › SSR Standard › Repair and Diagnosis › External Pages › Different car › Section 12 (Door System, Mirror System & Window System) › Repair Instructions › Module Replacement - Front Power Window › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the window.
  2. Remove the trim panel. Refer to Trim Panel Replacement - Side Front Door (With YE9 Early Production)  or Trim Panel Replacement - Side Front Door (With YE9 Late Production) .
  3. Remove the water deflector. Refer to Water Deflector Replacement - Front Door .
  4. Disconnect the wiring harness from the window motor assembly.
  5. Remove the 2 bolts holding the window to the regulator.
  6. Remove the bolts from the window regulator.
    7. Fig 1: Removing Window Regulator Bolts
    GM348453Courtesy of GENERAL MOTORS CORP.
  7. Remove the window regulator assembly from the door folding both sides together.
About FixVault