FixVault

Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the floor air outlet duct on the drivers side. Refer to Air Outlet Replacement - Floor .
  2. Fig 1: Removing & Installing Stop Lamp Switch
    GM1236562Courtesy of GENERAL MOTORS CORP.
  3. Locate the brake light switch (1), situated on the left.
  4. Turn the switch assembly with connector counter-clockwise and remove the switch.
  5. Remove the switch and disconnect the connector.
  6. IMPORTANT: The notch on plunger will be fully visible when plunger is all the way out.
  7. Pull switch plunger all the way out, which may require moderate force.