Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.

Right side shown, left side similar.

Disable the SIR system. Refer to SIR Disabling and Enabling Zone 2 or to SIR Disabling and Enabling Zone 6 .
Remove the center pillar lower molding. Refer to Garnish Molding Replacement - Center Pillar Lower in Interior Trim.

Fig 1: Removing/Installing Side Impact Sensor

Courtesy of GENERAL MOTORS CORP.

Remove the side impact sensor fasteners.
Remove the side impact sensor.
Remove the CPA and disconnect the electrical connector to the side impact sensor.