Removal Procedure

WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION: Eye protection must be worn when drilling rivets to reduce the chance of personal injury.

Raise the rear seat.
Remove the rivets retaining the lock assembly to the tool storage compartment.
Remove the lock assembly from the vehicle.

Fig 1: Removing Tool Storage Compartment Lock (PRO)

Courtesy of GENERAL MOTORS CORP.

Installation Procedure

Fig 2: Installing Tool Storage Compartment Lock (PRO)

Courtesy of GENERAL MOTORS CORP.

Install the lock assembly to the vehicle.
Install the rivets retaining the lock assembly to the tool storage compartment.
Lower the rear seat.