Removal Procedure

WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.

Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
Remove the tire and wheel. Refer to Tire and Wheel Removal and Installation in Tires and Wheels.

Fig 1: Removing/Installing Brake Pressure Hose At Strut

Courtesy of GENERAL MOTORS CORP.

Disconnect the brake hose from the brake bracket.
If applicable, disconnect the ABS harness from the brake bracket.

Fig 2: Removing/Installing Strut-To-Steering Knuckle Nuts & Bolts

Courtesy of GENERAL MOTORS CORP.

Loosen the steering knuckle to strut fasteners.

Fig 3: Disconnecting Stabilizer Bar Link

Courtesy of GENERAL MOTORS CORP.

Disconnect the stabilizer link from the strut assembly. Refer to Stabilizer Shaft Link Replacement .

Fig 4: Removing/Installing Strut Assembly Body Attachment Nut

Courtesy of GENERAL MOTORS CORP.

Remove the strut assembly to body attachment nut. Discard the nut.

IMPORTANT: Protect the CV boot during strut removal.

Remove the strut to knuckle fasteners. Discard the fasteners.
Remove the strut assembly from the vehicle.
For component replacement, refer to Strut, Strut Component and/or Spring Replacement .