Removal Procedure
WARNING: This page is about a different car, the 2005 Saturn L300. However, it is still accessible from the selected car via links, so may be relevant.
- Raise the hood.
- Lift up the right end of the hood seal.
- Lift up the right side of the cowl cover.
- Remove the nuts from the transaxle control module (TCM) cover.
- Lift the cover off of the studs.
- Depress the lock and rotate the connector lever down.
- Disconnect TCM electrical connector.
- Depress the lock tab holding the TCM in the carrier.
- Lift the TCM straight up to remove the TCM from the carrier.