FixVault
Home › Chevrolet › 2005 › SSR Standard › Repair and Diagnosis › External Pages › Different car › Section 204 (Door System, Mirror System & Window System) › Repair Instructions › Window Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Door Trim Panel
    GM63818Courtesy of GENERAL MOTORS CORP.
  1. Remove the door trim panel. Refer to Trim Panel Replacement - Driver Door  or to Trim Panel Replacement - Passenger Door .
    2. Fig 2: Water Deflector At Door Inner Panel
    GM63790Courtesy of GENERAL MOTORS CORP.
  2. Remove the water deflector.
    3. Fig 3: Radio Speaker Assembly At Door
    GM63833Courtesy of GENERAL MOTORS CORP.
  3. Remove the door radio speaker assembly.
    • Remove the screws mounting the speaker assembly.
    • Disconnect the electrical/audio connector.
    4. Fig 4: View of Window Clamp Access Plugs
    GM63834Courtesy of GENERAL MOTORS CORP.
  4. Remove the window clamp sight access plugs.
    5. Fig 5: Electrical Connector At Driver Side Switch
    GM63823Courtesy of GENERAL MOTORS CORP.
  5. Reconnect the window switch.
  6. Reposition the window full up to access the window clamp nuts.
  7. Disconnect the window switch.
    8. Fig 6: View Of Door Window
    GM63801Courtesy of GENERAL MOTORS CORP.
  8. Mark the location of the window.
  9. Loosen the window clamp nuts.
  10. Remove the window through the top opening of the door.
About FixVault