FixVault
Home › Chevrolet › 2005 › Uplander Base, Van Cargo Extended › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.5L - Introduction (2 Of 2) › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Locating Fuel Tank Pressure Sensor
    GM1480291Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel tank. Refer to Fuel Tank Replacement (Long Wheel Base)  or Fuel Tank Replacement (Short Wheel Base) .
  2. Disconnect the electrical connector from the fuel tank vapor pressure sensor.
  3. Remove the fuel tank pressure (FTP) sensor from the fuel sender.
About FixVault