FixVault
Home › Chevrolet › 2005 › Uplander LS › Repair and Diagnosis › Brakes › Antilock Brake System, Traction Control System & Stability Control System › Repair Instructions › Wheel Speed Sensor Replacement - Rear › Installation Procedure

Installation Procedure

  1. Install the hub and bearing assembly to the vehicle. Refer to Wheel Bearing/Hub Replacement - Rear (Without Independent Suspension) or Wheel Bearing/Hub Replacement - Rear (Independent Suspension) in Rear Suspension.
  2. Turn the ignition switch to the ON position, with the engine OFF.
  3. Perform the diagnostic system check. Refer to Diagnostic System Check - Vehicle in Vehicle DTC Information.
About FixVault