FixVault
Home › Chevrolet › 2005 › Venture Base, Van Cargo Extended › Repair and Diagnosis › Accessories & Equipment › Headlights › Lighting Systems › Repair Instructions › Daytime Running Lights (DRL) Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Daytime Running Lamp Module
    GM318092Courtesy of GENERAL MOTORS CORP.
  1. Position the daytime running lamp module in the bracket.
    2. Fig 2: View Of Daytime Running Lamp Module & Bracket
    GM318094Courtesy of GENERAL MOTORS CORP.
  2. Slide the daytime running lamp module into the bracket in order to secure the module.
  3. Connect the electrical connectors.
  4. Install the instrument panel insulator. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages and Console.
  5. Connect the battery negative cable. Refer to Battery Negative Cable Disconnect/Connect Procedure in Engine Electrical.
About FixVault