Installation Procedure

Fig 1: View Of Battery Ground (Negative) Cable And Bolt

Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to Fastener Notice in Cautions and Notices.

IMPORTANT: Clean any existing corrosion from the battery terminal bolt flange and the battery cable end.

Install the battery ground (negative) cable and bolt to the battery.
Tighten: Tighten the battery terminal bolt to 16 N.m (12 lb ft).
Reprogram the radio presets. Refer to Radio Setup in Entertainment.
Re-initialize the power sliding doors. Refer to Power Sliding Door (PSD) Re-Initialization in Doors.