FixVault

Scan Tool Data List

The scan tool data list(s) contain all the instrument panel, gages, and console related parameters that are available on the scan tool. The parameters in the list are arranged in order, as they appear on the scan tool. The data list column indicates the location of the parameter within the scan tool menu selections.

Use the scan tool data list(s) as directed by a diagnostic table or in order to supplement the diagnostic procedures. Begin all of the diagnostic procedures with Diagnostic System Check - Vehicle in Vehicle DTC Information.

Use the scan tool data list(s) only after the following is determined:

The typical data values are obtained from a properly operating vehicle under the conditions specified in the first row of the scan tool data list table. Comparison of the parameter values from the suspect vehicle with the typical data values may reveal the source of the customer concern.

IPC Scan Tool Data List

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON/Engine OFF, Doors Closed, Lights Off, Hatch Closed, Park Brake Not Set, No Trailer Tow Attached
8-Digit GM Part Number Module Information - Varies
ABS Warning Lamp Inputs On/Off Off
Accessory Data Volts 9-16 Volts
Air Bag Lamp Inputs On/Off Off
Door Ajar Lamp Inputs On/Off Off
Fog Lamp Inputs On/Off Off
Hatch Ajar Lamp Inputs On/Off Off
Hi. Res. Speed Failed Inputs Yes/No No
Ignition 0 Data Volts 9-16 Volts
Ignition 1 Data Volts 9-16 Volts
Low Brake Fluid Inputs On/Off Off
Low Brake Fluid Report Inputs Yes/No No
Low Coolant Lamp Inputs On/Off Off
Low Fuel Lamp Timer Data Milliseconds 93.8 ms (varies)
Low Res. Speed Failed Inputs Yes/No No
Odometer Msg. Failed Inputs Yes/No No
Park Brake Telltale Inputs On/Off Off
PROM ID Module Information - Varies
RAP Timer Inputs On/Off Off
Restraints ID Module Information - Varies
Traction Off Lamp Inputs On/Off Off
Trailer Tow Lamp Inputs On/Off Off
Trip Reset Switch Inputs Active/Inactive Inactive
Trip Reset Timer Data Milliseconds 1437.5 ms
PCM Scan Tool Data List

Scan Tool Parameter Data List Units Displayed Typical Data Value
Operating Conditions: Ignition ON/Engine OFF
Current Gear Engine Data 1 - Varies
Engine Oil Level Engine Data 2 OK/Low OK
Engine Oil Life Engine Data 2 % 0-100% (varies)
Engine Oil Pressure Engine Data 2 OK/Low OK
Fuel Level EVAP %
Volts
0-100% (varies)
0-5 V
Vehicle Speed Engine Data 1 km/h 0 km/h