FixVault
Home › Chevrolet › 2005 › Venture LS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.4L - Introduction › Repair Instructions › Exhaust Gas Recirculation (EGR) Valve Replacement › Removal Procedure

Removal Procedure

  1. Turn OFF the ignition.
    2. Fig 1: View Of EGR Valve
    GM507392Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the exhaust gas recirculation (EGR) valve electrical connector.
  3. Remove the transaxle fluid filler tube. Refer to Filler Tube and Seal Replacement .
  4. Remove the bolt retaining the pipe assembly from the EGR valve and carefully pull the pipe assembly back.
  5. Remove the EGR valve retaining bolts.
  6. Remove the EGR valve assembly.
  7. Remove the gasket.
  8. Clean the EGR valve mating surface.
About FixVault