FixVault
Home › Chevrolet › 2005 › Venture LS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.4L - Introduction › Repair Instructions › Fuel Tank Pressure Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: Fuel Pump & Sender Assembly Component View
    GM50636Courtesy of GENERAL MOTORS CORP.
  1. Install the new FTP sensor (7) to the modular fuel sender with a new seal.
  2. Connect the FTP sensor electrical connector.
  3. Install the fuel tank. Refer to Fuel Tank Replacement (Short Wheel Base)  or Fuel Tank Replacement (Long Wheel Base) .
About FixVault