FixVault
Home › Chevrolet › 2005 › Venture LS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 3.4L - Introduction › Repair Instructions › Intake Air Temperature (IAT) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing/Installing Intake Air Temperature (IAT) Sensor
    GM12347Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the intake air temperature (IAT) sensor electrical connector.
  2. Carefully grasp the sensor and with a twisting and pulling motion, remove the IAT sensor from air intake duct.
About FixVault