Conditions for Running the DTC

The Following conditions must be met:

• DTCs P0030, P0101, P0102, P0103, P0107, P0108, P0112, P0113, P0116, P0117, P0118, P0121, P0122, P0123, P0125, P0128, P0201, P0202, P0203, P0204, P0205, P0206, P0442, P0443, P0446, P0449, P0452, P0453, P0455, P0464 are not set.
• DTCs P2A01, P0401 (where applicable), P0420 are not commanding fuel.
• The system voltage is between 9-18 volts.
• The scan tool special functions are not active.
• The following conditions must also be met:
  • The Engine Run Time parameter is more than 100 seconds.
  • The ECT Sensor parameter is more than 65°C (149°F).
  • The MAF sensor parameter is between 4 g/s and 30 g/s.
  • The Engine Speed parameter is between 600-3,000 RPM.
  • The above conditions have been met for more than 2 seconds.