FixVault
Home › Chevrolet › 2005 › Venture LS › Repair and Diagnosis › External Pages › Different car › Section 432 (Electronic Suspension System - Automatic Level Control) › Repair Instructions › Automatic Level Control Sensor Link Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Pontiac Montana, 2002 Oldsmobile Silhouette, and 2002 Chevrolet Venture. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: When you are servicing the automatic level control sensor link, ensure that the sensor link and the sensor arm are not damaged. Ensure the sensor arm and the sensor link are properly oriented. Improper orientation of the sensor arm and the sensor link may cause damage to the automatic level control system or the vehicle.
  1. Raise and support the vehicle. Refer to LIFTING & JACKING VEHICLE .
    2. Fig 1: Automatic Level Control Sensor Link
    G01828544Courtesy of GENERAL MOTORS CORP.
  2. Remove the ALC sensor link from the tie rod ball stud. Remove the ALC sensor link from the sensor arm ball stud.
About FixVault