FixVault
Home › Chevrolet › 2005 › Venture LS › Repair and Diagnosis › Steering › Steering Wheel & Steering Column › Repair Instructions › Steering Wheel Control Switch Assembly Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Steering Wheel Control Switch Assembly
    GM754646Courtesy of GENERAL MOTORS CORP.
  1. Remove the inflatable restraint steering wheel module. Refer to Inflatable Restraint Steering Wheel Module Replacement in SIR.
  2. Remove the steering wheel controls wire harness from the retainers in the steering wheel.
  3. Remove the steering wheel control switch by pushing on the back of the switch through the opening in the steering wheel.
  4. Disconnect the electrical connector from the steering wheel control switch.
About FixVault