FixVault
Home › Chevrolet › 2005 › Venture LS › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › 2-3 Shift Solenoid Valve Replacement › Installation Procedure

Installation Procedure

  1. Install a new O-ring seal (316) onto the 2-3 shift solenoid valve (315B) if the O-ring was removed.
    2. Fig 1: View Of 2-3 Shift Solenoid & O-Ring
    GM49385Courtesy of GENERAL MOTORS CORP.
  2. Install the 2-3 shift solenoid (315B).
  3. Install the 2-3 shift solenoid valve retainer (314C) into the control valve body (301).
  4. Connect the transaxle wiring harness.
  5. Install the case side cover. Refer to Case Side Cover Replacement .
About FixVault