Installation Procedure

Fig 1: View Of Transaxle Oil Pan And Gasket

Courtesy of GENERAL MOTORS CORP.

Install the oil pan gasket (25).
Install the oil pan (24).

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the oil pan bolts (23).
Tighten: Tighten the oil pan bolts (23) to 14 N.m (10 lb ft).
Lower the vehicle.

NOTE: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the transaxle.

Adjust the fluid level. Refer to the following information.
- Transmission Fluid Checking Procedure
- Fluid and Lubricant Recommendations in Maintenance and Lubrication.
- Capacities - Approximate Fluid in Maintenance and Lubrication.
Inspect for fluid leaks.