FixVault
Home › Chevrolet › 2006 › Cobalt LTZ › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Battery Replacement › Removal Procedure

Removal Procedure

    Fig 1: Disconnecting Negative Battery Cable
    GM1656237Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Open the positive battery cable cover.
  3. Loosen the positive battery cable bolt.
  4. Remove the positive battery cable (1) from the battery.
    5. Fig 2: Removing Battery Vent Tube From Battery
    GM1656246Courtesy of GENERAL MOTORS CORP.
  5. Remove the battery vent tube from the battery.
  6. Remove the battery retainer bolt (1).
  7. Remove the battery strap (2) and retainer (3).
    8. Fig 3: Removing Battery
    GM1548332Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Do not tip the battery more than 40 degrees during removal.
  8. Remove the battery (4).
About FixVault