FixVault
Home › Chevrolet › 2006 › Cobalt SS, 4D Sedan, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.4L - Introduction (2 Of 2) › Repair Instructions › Fuel Level Sensor Replacement › Removal Procedure

Removal Procedure

CAUTION: Refer to Gasoline/Gasoline Vapors Caution .
    Fig 1: View Of Fuel Pump Module Assembly
    GM889989Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel pump module assembly. Refer to Fuel Pump Module Replacement .
  2. Remove the fuel level sensor wiring harness connector from the molded-in tab (1) on the pump module bowel.
  3. Disconnect the fuel level sensor electrical connector from the pump module.
  4. Depress the retaining tab (2) on the sensor and begin to slide the level sensor away from the pump module.
  5. Carefully slide the level sensor the rest of the way off of the pump module.
About FixVault