FixVault
Home › Chevrolet › 2006 › Corvette Base, 2D Convertible, Standard › Repair and Diagnosis › Body & Frame › Seats › Seat System › Repair Instructions › Heated Seat Control Module Replacement - Front › Removal Procedure

Removal Procedure

    Fig 1: Seat Mounting Component View
    GM71215Courtesy of GENERAL MOTORS CORP.
  1. Remove the seat. Refer to Seat Replacement .
    2. Fig 2: Wire Assembly To Seat Cushion Frame
    GM281999Courtesy of GENERAL MOTORS CORP.
  2. Remove the plastic fasteners securing the heated seat control module to the seat cushion foam support wires.
  3. Disconnect the harness connectors.
  4. Remove the heated seat control module from the seat.
About FixVault