FixVault
Home › Chevrolet › 2006 › Corvette Base, 2D Convertible, Standard › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Remote PS Fluid Reservoir Bracket Replacement › Installation Procedure

Installation Procedure

Fig 1: Power Steering Fluid Reservoir, Capstick, Bracket & Bolts
GM663178Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering fluid reservoir bracket (5) into the vehicle.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the bolts (4) to the power steering fluid reservoir bracket (5).

    Tighten:  Tighten the bolts to 50 N.m (37 lb ft).

  3. Install the power steering fluid reservoir. Refer to Remote Power Steering Fluid Reservoir Replacement .
  4. Bleed the power steering system. Refer to Bleeding the Power Steering System .
About FixVault