FixVault
Home › Chevrolet › 2006 › Cutaway 6.6 2 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: Removing Right Side Knee Bolster Trim Panel
    GM853308Courtesy of GENERAL MOTORS CORP.
  1. Remove the right side knee bolster trim panel. Refer to Knee Bolster Replacement - Right in Instrument Panel, Gages, and Console.
    2. Fig 2: Disconnecting Electrical Connectors From Body Control Module
    GM923655Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the electrical connectors (2) from the body control module (BCM) (1).
    3. Fig 3: Releasing Tabs Retaining BCM To Bracket
    GM923653Courtesy of GENERAL MOTORS CORP.
  3. Release the tabs (2) retaining the BCM (1) to the bracket.
  4. Remove the BCM (1) from the vehicle.
About FixVault