FixVault
Home › Chevrolet › 2006 › HHR LS, Automatic › Repair and Diagnosis › Electrical › Starter › Battery, Charging System And Starting System › Repair Instructions › Generator Replacement › Removal Procedure

Removal Procedure

  1. Disconnect negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the drive belt. Refer to Drive Belt Replacement or Drive Belt Replacement .
  3. Remove the air cleaner assembly, if necessary. Refer to Air Cleaner Assembly Replacement or Air Cleaner Assembly Replacement .
    4. Fig 1: TAC,Fuel Injector Harness & Generator Electrical Connectors
    GM1623764Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the generator electrical connector (3).
    5. Fig 2: View Of Engine Harness Terminal,Terminal Nut, & Engine Harness Boot
    GM1625472Courtesy of GENERAL MOTORS CORP.
  5. Reposition the engine harness boot (3).
  6. Remove the generator terminal nut (2).
  7. Remove the engine harness terminal (1) from the generator.
    8. Fig 3: Generator & Bolts
    GM1631670Courtesy of GENERAL MOTORS CORP.
  8. Remove the generator bolts.
  9. Remove the generator.
About FixVault