FixVault
Home › Chevrolet › 2006 › HHR LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction (2 Of 2) › Repair Instructions › Ignition Control Module Replacement › Removal Procedure

Removal Procedure

    Fig 1: Ignition Control Module Electrical Connector
    GM1625481Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the ignition control module electrical connector.
    2. Fig 2: View Of ICM
    GM783965Courtesy of GENERAL MOTORS CORP.
  2. Remove the ignition control module screws.
  3. Remove the ignition control module from the ignition coil housing.
About FixVault