FixVault
Home › Chevrolet › 2006 › HHR LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction (2 Of 2) › Repair Instructions › Manifold Absolute Pressure (MAP) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: MAP Sensor
    GM1581050Courtesy of GENERAL MOTORS CORP.
  1. Install the NEW MAP sensor seal, if required.
  2. Install the MAP sensor.
  3. Connect the MAP sensor electrical connector.
  4. Install the throttle body. Refer to Throttle Body Assembly Replacement .
About FixVault