FixVault
Home › Chevrolet › 2006 › HHR LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction (2 Of 2) › Repair Instructions › Mass Air Flow (MAF) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: MAF Sensor Electrical Connector
    GM1625474Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass airflow (MAF) sensor electrical connector.
  2. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
    3. Fig 2: MAF Sensor
    GM1633079Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAF sensor screws.
  4. Remove the MAF sensor.
About FixVault