FixVault
Home › Chevrolet › 2006 › HHR LS, Automatic › Repair and Diagnosis › External Pages › Different car › Section 104 (Front Suspension System) › Repair Instructions › Front Lower Control Arm Bushing Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
  1. Place the NEW bushing to the tapered side of the control arm.
    2. Fig 1: Installing Control Arm Bushing
    GM851698Courtesy of GENERAL MOTORS CORP.
  2. Using the J 41211  , pull the control arm bushing through the opposite direction of the control arm. See Special Tools .
  3. Install the bushing to the same depth and orientation as noted during removal.
  4. Remove the J 41211  from the control arm. See Special Tools .
  5. Install the control arm. Refer to Lower Control Arm Replacement .
About FixVault