FixVault
Home › Chevrolet › 2006 › HHR LS, Standard › Repair and Diagnosis › Engine Mechanical › Engine Exhaust System › Repair Instructions › Exhaust Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Heat Shield, Rivets & Nuts
    GM1631773Courtesy of GENERAL MOTORS CORP.
  1. Position the exhaust heat shield to the underbody.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the exhaust heat shield nut (2).

    Tighten:  Tighten the nut to 10 N.m (89 lb in).

  3. Install 4 NEW heat shield rivets (1).
  4. Install the muffler. Refer to Muffler Replacement .
About FixVault