FixVault
Home › Chevrolet › 2006 › HHR LS, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction (2 Of 2) › Repair Instructions › Knock Sensor (KS) Replacement › Removal Procedure

Removal Procedure

    Fig 1: KS Harness Electrical Connector
    GM1622787Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the knock sensor (KS) harness electrical connector (6).
    2. Fig 2: KS Bolt
    GM1578476Courtesy of GENERAL MOTORS CORP.
  2. Remove the KS bolt.
  3. Remove the KS.
About FixVault