FixVault
Home › Chevrolet › 2006 › HHR LS, Standard › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.2L - Introduction (2 Of 2) › Repair Instructions › Mass Air Flow (MAF) Sensor Replacement › Installation Procedure

Installation Procedure

    Fig 1: MAF Sensor
    GM1633079Courtesy of GENERAL MOTORS CORP.
  1. Install the MAF sensor.
    2. NOTE: Refer to Fastener Notice .
  2. Install the MAF sensor screws.

    Tighten:  Tighten the screws to 10 N.m (89 lb in).

    3. Fig 2: Air Cleaner Assembly
    GM1625474Courtesy of GENERAL MOTORS CORP.
  3. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement .
  4. Connect the MAF sensor electrical connector.
About FixVault