Fastener Tightening Specifications
WARNING: This page is about a different car, the 2007 Chevrolet HHR. However, it is still accessible from the selected car via links, so may be relevant.
Fastener Tightening Specifications
| Application | Specification | |
|---|---|---|
| Metric | English | |
| Coolant Heater Bolt | 10 N.m | 89 lb in |
| Coolant Reservoir Bolt | 9 N.m | 80 lb in |
| Condenser Bolt | 20 N.m | 15 lb ft |
| Engine Coolant Temperature (ECT) Sensor | 20 N.m | 15 lb ft |
| Exhaust Heat Shield Stud | 22 N.m | 16 lb ft |
| Radiator Bracket Upper Bolt | 9 N.m | 80 lb in |
| Radiator Support Lower Bolt | 34 N.m | 25 lb ft |
| Thermostat Housing Bolt | 10 N.m | 89 lb in |
| Thermostat Housing Cover Bolt | 10 N.m | 89 lb in |
| Water Pump Access Plate Bolt | 10 N.m | 89 lb in |
| Water Pump Bolt | 25 N.m | 18 lb ft |
| Water Pump Sprocket Bolt | 10 N.m | 89 lb in |