Inflatable Restraint Instrument Panel Module Replacement

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inflatable Restraint Instrument Panel Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
CAUTION: Refer to SIR Inflator Module Handling and Storage Caution in Cautions and Notices. CAUTION: Refer to SIR Caution in Cautions and Notices. NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Preliminary Procedure: Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 5 .
1	Plate, Instrument Panel Trim
2	Compartment Assembly, Instrument Panel Tip: Squeeze the inner compartment sides together in order to lower the door past the down stops.
3	Cover, Instrument Panel Compartment Accessory Hole
4	Bolt, Instrument Panel Inflatable Restraint Module (Qty: 2) Tighten: 10 N.m (89 lb in)
5	Module, Instrument Panel Inflatable Restraint Tip: Remove the connector position assurance (CPA) retainer. Disconnect the electrical connector. Fully deploy the module before disposal. If the module was replaced under warranty, fully deploy and dispose of the module after the required period. Refer to Inflator Module Handling and Scrapping .