Inflatable Restraint Roof Rail Module Replacement - Front

WARNING: This page is about a different car, the 2005 Pontiac Pursuit and 2005 Chevrolet Cobalt. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Inflatable Restraint Roof Rail Module

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
NOTE: Refer to Fastener Notice in Cautions and Notices. Fastener Tightening Specifications: Refer to Fastener Tightening Specifications .
Preliminary Procedures Disable the supplemental inflatable restraint (SIR) system. Refer to SIR Disabling and Enabling Zone 2 . Remove the headliner. Refer to Headliner Replacement .
1	Screw, Inflatable Restraint Roof Rail Module Tighten: 8 N.m (71 lb in)
2	Bolt, Inflatable Restraint Roof Rail Module Tighten: 8 N.m (71 lb in)
3	Bolt, Inflatable Restraint Roof Rail Module Tighten: 8 N.m (71 lb in)
4	Retainer, Inflatable Restraint Roof Rail Module (Qty: 3)
5	Bolt, Inflatable Restraint Roof Rail Module Tighten: 8 N.m (71 lb in)
6	Module Assembly, Inflatable Restraint Roof Rail Tip: Remove the connector position assurance (CPA) retainer. Disconnect the electrical connector.