FixVault
Home › Chevrolet › 2006 › Impala SS › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Diagnostic Information and Procedures › DTC B1475 › Circuit/System Testing

Circuit/System Testing

  1. With the ignition OFF, disconnect the RAP relay and connect a test lamp between the relay control circuit and ground.
  2. With the driver door open, cycle the ignition ON and OFF. The test lamp should turn ON and OFF when changing ignition switch positions
    • If the test lamp remains OFF all the time, test for a short to ground or an open/high resistance on the relay control circuit. If the circuit tests normal, replace the BCM.
    • If the test lamp remains ON all the time, test for a short to voltage on the relay control circuit. If the circuit tests normal, replace the BCM.
  3. If test lamp turns ON and OFF normal, test or replace the RAP relay.
About FixVault