Compass Calibration

Before calibrating the compass, drive the vehicle to an area that is magnetically clean (free of large metallic objects).

1. Turn ON the ignition.
2. Press the MODE button in order to advance to the COMPASS CALIBRATION mode.
3. Press the SELECT button in order to display PRESS RESET TO RECALIBRATE.
4. Press the RESET button.
5. Drive the vehicle in circles at a speed of less than mph 16 km/h (10 mph) until the driver information center (DIC) displays CALIBRATION COMPLETE and the compass displays the proper vehicle heading. The calibration procedure is now complete.