FixVault
Home › Chevrolet › 2006 › Impala SS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction (2 Of 2) › Repair Instructions › Brake Booster Vacuum Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Disconnecting The Brake Booster Vacuum Sensor Electrical Connector
    GM1618878Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the brake booster vacuum sensor electrical connector.
    2. Fig 2: Removing The Brake Booster Vacuum Sensor
    GM1488348Courtesy of GENERAL MOTORS CORP.
  2. Remove the brake booster vacuum sensor (1) from the booster.
  3. Remove the brake booster vacuum sensor grommet (2) from the booster.
About FixVault