FixVault
Home › Chevrolet › 2006 › Impala SS › Repair and Diagnosis › Engine Performance › System › Engine Control System - 5.3L - Introduction (2 Of 2) › Repair Instructions › Spark Plug Wire Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of The Ignition Coil And Bracket Assembly
    GM1411963Courtesy of GENERAL MOTORS CORP.
  1. Remove the spark plug wire from the spark plug.
    1. Twist the spark plug wire boot a 1/2 turn.
    2. Pull only on the boot in order to remove the wire from the spark plug.
  2. Remove the spark plug wire from the ignition coil (724).
    1. Twist the spark plug wire boot a 1/2 turn.
    2. Pull only on the boot in order to remove the wire from the ignition coil.
About FixVault