Rear Toe Adjustment
WARNING: This page is about a different car, the 2012 Chevrolet Malibu. However, it is still accessible from the selected car via links, so may be relevant.
- Loosen the inner toe link cam bolt and nuts.
- Rotate the cam bolt to the required toe specification settings. Refer to Wheel Alignment Measurement .
- Maintain the toe setting while tightening the cam bolt nut.
Tighten
Tighten the rear suspension adjustment link lock nut to 110 N.m (81 lb ft).
- Check the toe setting after tightening.
- Adjust the toe setting if necessary.
CAUTION:
Refer to Fastener Caution .