FixVault
Home › Chevrolet › 2006 › Impala SS › Repair and Diagnosis › External Pages › Different car › Section 90 (Lighting Systems) › Repair Instructions › Brake Pedal Position Sensor Calibration › Calibration Procedure

Calibration Procedure

WARNING: This page is about a different car, the 2006 Buick LaCrosse and 2006 Buick Allure. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ON the ignition, with the engine OFF.
  2. Install a scan tool, select the proper vehicle and options.
  3. Select the BPP sensor calibration procedure from the BCM and follow the directions displayed on the screen.
About FixVault