FixVault
Home › Chevrolet › 2006 › Optra LS, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 1.4L DOHC › Diagnostic Information and Procedures › DTC P0107 or P0108 › Circuit/System Verification

Circuit/System Verification

  1. Start the engine, observe the MAP Sensor parameter. The reading should be between 32-42 kPa.
  2. If the vehicle passes the Circuit/System Verification Test, then operate the vehicle within the conditions for running the DTC. You may also operate the vehicle within the conditions that are captured in the Freeze Frame/Failure Records Data List.
About FixVault