Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Reading Lamp And Screws

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the reading lamp with the screws.
Tighten: Tighten the reading lamp screws to 1.5 N.m (13 lb in) .
Install the reading lamp lens.
Connect the negative battery cable.