Installation Procedure

WARNING: This page is about a different car, the 2005 Chevrolet Optra5 and 2005 Chevrolet Optra. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Rear Liftgate Lamp Assembly Through Access Hole

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the lamp assembly with the nuts.
Tighten: Tighten the liftgate lamp assembly nuts to 3 N.m (27 lb in) .
Install the liftgate lamp access panels.
Close the liftgate.
Connect the negative battery cable.