FixVault
Home › Chevrolet › 2006 › SSR Automatic › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Shift Lever Bezel Replacement › Removal Procedure

Removal Procedure

  1. Remove the gearshift knob. Refer to Floor Shift Control Knob Replacement .
    2. Fig 1: View of Power Switch Module Electrical Connector
    GM1174604Courtesy of GENERAL MOTORS CORP.
  2. Using a flat-bladed plastic tool, release the 4 clips retaining the bezel to the floor console
  3. Disconnect the electrical connector from the power switch module.
  4. Remove the bezel from the vehicle.
About FixVault